|
|
|||
Home | Troubleshooting | Quick Setup | Cisco How to | Data Recovery | Forums | Blog | IT Exam Practice | Services | About Us | Chicagotech MVP | Search | Contact Us | |
|
How do we configure network in Failover Cluster - Step by step with screenshots
We get lot questions regarding the Failover Cluster network configuration. I am posting one of our Failover Cluster as example and hope that will help others.
1. There are total 12 NICs. 2. 2 NICs are created as NIC Teaming for MgmtTeam. 3. 3 NICs are configured for VLAN such as VLAN 1, 10, 200 and 800. Note: VLAN 800 is for SAN.
4. 1 NIC for Cluster Shared Volumes. 5. 1 NIC for HeartBeat. 6. 1 nIC for LiveMigration 7. 3 NICs are for iSCSI. 8. 1 NIC is disable at this time as spare.
9. In the Hyper-v, we create 4 Virtual Networks for VLAN 800, VLAN 1, VLAN 10 and VLAN 200.
Post your questions, comments, feedbacks and suggestions Related Topics
|
|
|
This web is provided "AS IS" with no warranties.
Copyright © 2002-2018
ChicagoTech.net,
All rights reserved. Unauthorized reproduction forbidden.